Takumi U600 5 Axis UMC, 2018 – NEW In Crate, 6 Month Part Warranty, TSC
$194,500.00
Over $450K Replacement Cost
Equipped With:
Heidenhain TNC 7 controller
Dynamic Collision Monitoring
15,000 rpm Big Plus® In-Line spindle
5-Axis Center Dynamic Offset
Coolant Through Spindle (435 psi)
Cutting air blast
Spindle oil cooler
Oil Skimmer
Linear Axis Scales X / Y / Z
3 Axis Absolute Encoder Motors
40 Station ATC
Chain Type Chip Conveyor
Twin Enclosure Augers
Heidenhain TS 460 Automatic
Workpiece Measurement System
Blum Automatic Tool Length
Measurement System
Wash Down System
3 Color Signal Light
Working Light
Manual Pulse Generator (MPG)
Electrical Cabinet Air Conditioner
Air & Coolant Wash Guns
Tool kits
Leveling Bolts & Pads
Operation Manuals
CE Certified
U600 Standard Specification
TRAVEL
X axis Inch / mm 24.4 / 660
Y axis Inch / mm 39.4 / 1,020
Z axis Inch / mm 19.7 / 500
C axis Rotation Range ° 360
A axis Rotation Range ° +30 / -110
Distance from spindle nose to
table
Inch / mm 3.5 – 23.2 / 90-590
TABLE
Dimension Ø Inch / mm 23.6 / 600
Max. load Lbs / kg 1,100 / 500
T-slot(width×pitch×number) mm No. 6 X 14 (60°)
SPINDLE
Spindle type In-Line
Max. speed rpm 15,000
Spindle motor torque Ft-lbs / Nm 65.9 / 89.4
Spindle motor power (S6-40%) HP / kW 16.8 / 12.5
Spindle taper BT / CAT 40
FEED
Rapid traverse (X/Y/Z) ipm / (m/min) 1,417 / (36)
Maximum cutting feed rate ipm / (m/min) 787 / (20)
C axis Rotation Speed rpm 33
A axis Rotation Speed rpm 25
ATC
ATC type – Rotating Magazine / Swing Arm
Magazine capacity Number of Pockets 50
Max. tool dia.(next pockets
empty) Inch / mm 2.95 (5.9) / 75 (150)
Max. tool length Inch / mm 11.8 / 300
Max. tool weight Lbs / kg 17.6 / 8
SPACE & SYSTEM REQUIREMENT
Control Unit – Heidenhain TNC 7
Pneumatic pressure Psi / kgf/cm2 85 / 6
Electrical power consumption kVA 60
Machine net weight Lbs / kg 30,864 / 14,000
Max. floor space(L×W×H) Inch 135.43” x 177.16” x 133.85”
All specifications are assumed to be correct but must be confirmed by the purchasing entity.
